Hope’s Pro 5 is the combination of 30+ years of experience manufacturing hubs to meet and exceed the demands of current and future bike technology.
Hope's new Fortus 30 Single Cavity (SC) rim offers a strong but lighter version of the Fortus 30 wheel, designed for Trail and Enduro use.
The Hope Pro 4 proved to be one of the most reliable and versatile hubs on the market. The Pro 5 builds on this with improvements throughout, offering the right balance between speed of pick-up, load capacity, durability and drag.
One of the key design objectives for the Pro 5 was the reduction of drag in the drive mechanism. This has real world riding benefits and was achieved by upgrading the sealing with a new zero drag labyrinth seal, and an improved ratchet and pawl system, with new springs. Both greatly reduce drag as well as increase durability and load capacity when compared with the Pro 4.
Another big update comes in an increase in the points of engagement (from 44 to 108) using an offset 6 pawl freehub design, where 3 pawls are engaged at any time. This achieves the right balance between speed of pick-up, load capacity, drag & durability, and in real-world terms gives a speedy feel on the trail whilst keeping crank movement to an acceptable level without compromising the free running of the hub or its reliability.
Externally the shell takes a new profile to add stiffness without adding weight whilst housing a new axle design enabling the use of bigger bearings in a better arrangement to fit the latest freehub standards whilst increasing load capacity.
As with every product made at Hope durability and longevity are key. Everything about the Pro 5 has been considered, and tested to work in the worst conditions possible from seals to bearings....And eventually if something does wear out the Pro 5 is fully serviceable and rebuildable with simple tools, or if you need to change drivetrain standards one hub works with everything. So swapping freehubs is easily done, future proofing your wheels.
Features:
- Machine-built and hand-finished in Barnoldswick
- Built with Pro 5 32h hubs
- Increased engagement from 44 to 108 with a new offset 6 pawl freehub design
- 6 Bolt disc fitment
- Optimised rim profile suitable for 2.4” - 2.8” tyres
- Tubeless compatible (Valve and Tape supplied)
- Shimano Aluminium, Shimano Steel, MicroSpline and Sram XD freehub body options available
- Welded 6061 T6 Aluminium rim with eyelets
- Internal width: 30mm, External width: 35mm
- Profile depth: 20mm
- Black Sapim Race stainless steel double butted spokes built with silver brass nipples