Discover the fun and the benefits of road cycling with the Keo Classic 3 Plus clipless pedal.
Simple to use, it is impossible to adjustment the cleat entry/release tension too low for an easy clip out. Its large and wide contact surface provides excellent pedalling stability.
The Keo classic 3 spindle is made up of an oversized steel axle with miniature ball bearings (12 mm inside x 18 mm outside) and a needle bearing cartridge for improved wear resistance. A spacer is used to hold the needle bearing cartridge in place.
A new method of fitting the spindle into the pedal body also ensures the prolonged reliability of our pedals. Look spindles are only approved after a rotational test of 2 million cycles at 100tr/min with a load of 90kg on the centre of the pedal and an eccentric rotation (creating a shock on each rotation).
Look axles are only approved after a rotational test of 2 million cycles at 100 rpm with a load of 90 kg on the centre of the pedal and an eccentric rotation (which creates stress on each revolution). This is equivalent to a sprint by andré greipel of 1700 watts at 100 rpm for 333 hours! This test is much more demanding than the current standard, the iso 4210.
What is the difference between a Keo Classic 3 and a Keo Classic 3 Plus?
The material used for the contact area. The little extra, stainless steel rather than composite, optimizes pedal stiffness and hence the transfer of power from you to your bike. As for the rest, Look stick to what works: fast clip in / clip out and easy tension adjustment.
Specification:
- Spindle material: Chromoly
- Body material: Composite
- Platform material: Stainless steel
- Platform area: 400 mm²
- Platform width: 60 mm
- Total stack height (pedal + cleat): 17,8 mm (11.5 + 6.3 mm)
- Q Factor: 53 mm
- Retention: 8 to 12 Nm
- Cleats: KEO grip (included)
- Pedal weight: 140 g
- Weight pair + cleats: 350 g